DAB Standard for Digital Radio Tick Mark
The DRUK Digital Radio Tick Mark for both radio products and core technologies had made a transition on technical alignment from ETSI TS 103 461 v1.1.1 to v1.2.2. Since April 1st, 2022, all applications for product and core technology certification shall only be made using ETSI TS 103 461 v1.2.2.
Products are considered to consist of a core technology (a chip or module that may be common to many products) and displays, antennas, power supplies, casework, etc., which in combination are specific to a particular product model. To prove compliance against the minimum requirements, products shall pass both of the test specifications for core technology and products.
If the core technology is certified for all tests of TS 103 461 v1.1.2., only product tests in v1.2.2 are needed for testing compliance.
If any tests are not included in the certification of the core technology, those core technology tests according to TS 103 461 v1.2.2 must be performed and passed in addition to the product tests in TS 103 461 v1.2.2 for testing compliance.
Products built on core technology tested to TS 103 461 v1.1.1
All DRUK certifications remain valid. However, for those core technology certified for TS 103 461 v1.1.1 which has not been tested for alarm announcement capability, FIG 2 label capability and service following with ECC (Extended Country Code) capability, several additional tests of core technology and products shall be tested against TS 103 461 v1.2.2 after April 1st, 2022.
- All products must be tested for alarm announcement capability.
- Automotive products must be tested for service following with ECC.
- Automotive products subject to EECC must be tested for FIG 2 labels.
If any tests are not included in the certification of the core technology, those core technology tests according to TS 103 461 v1.2.2 must be performed and passed in addition to the product tests in TS 103 461v1.2.2 for testing compliance.
Contact us today to know more about our solution:
Contact: Victor Ko
Position: Sales Director
Email: victor.ko@intertek.com
Tel: +852 9423 2262
